Preheat Soldering Station, 450 W Bga Infrared Rework Electronic Hot Plate Preheat Preheating Station For Motherboard Rework Repair.

DetailsFixing Knobs: They can secure the electronic board holders stably.Stable Feet: The rubber feet at the bottom further maintain the stability of the product during operation and prevent scratches on your countertop.ApplicationIt can be used for the preheating of circuit boards and other processes that require overall uniform heating. It applies to electronic equipment maintenance, mobile communications maintenance, factory production, scientific research and development for preheating, drying work processing. With the desoldering device for desoldering the original preheating, it is convenient for large flat integrated circuits IC, double-layer board large components desoldering. SpecificationMaterial: Iron, Stainless Steel, RubberColor: BlackModel: 853AStyle: ModernMount Type: CountertopPower Source: Corded ElectricPlug: US StandardDisplay Type: LEDRated Voltage: 110V-127V/AC, 60HzPower: 450WOperating Ambient Temperature: 0-40℃/32-104℉Temperature Adjustment Range: 50-400℃/122-752℉Power Cord Length: About 1.5m/4.92 ftHeating Area Size: 120*120mm/4.72*4.72inProduct Size: 25*22*9cm±5mm/ 9.84*8.66*3.54in±0.19inPackage Size: 27*20*32cm/10.63*7.87*12.6inGrossWeight: 2.73kg/ 6.02lbs Net Weight: 2.59kg/5.71 lbs Package Included1 * Preheat Soldering Station1 * English Instruction1 * Power Cord Notes1.Please read the manual carefully and take necessary personal protective measures before use. Please do not place it in damp and corrosive areas, and keep the product away from children!2.Please ensure that the grounding wire of the machine is well grounded! Please do not let the airflow directly blow onto the board, as it will affect the heating of the heater! The desktop should be flat and the desktop material must also be heat-resistant!3.During the working process, the surface of the board and the surrounding area are very hot, please be careful to prevent burns! Please do not use this product near flammable objects! To move or touch the machine, please remember to turn off the power and wait for the heating area to completely cool to room temperature!4.This machine is a high-temperature electric heating product. If you are not using the machine, please cut off the power to avoid danger and accidents! To extend the lifespan of heating elements and machines, prolonged use of the machine at high temperatures (above 572℉) is prohibited. Under normal circumstances, the continuous working time of the machine should not exceed 8 hours! The ventilation holes of this machine should not be obstructed by foreign objects. 5.Please note that after starting the machine, the heating temperature may exceed the user-set temperature by 37.4-41℉. After a few minutes, the temperature will drop to the set temperature. Because the heating table is a machined product, there is residual oil in the screw holes, which will evaporate at high temperatures and emit white smoke and odor. This is a normal phenomenon, and after a period of use, this phenomenon will disappear.6.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• High Efficiency: The 450W strong power, a large heating area of 4.72 *4.72 inches, and an infrared ceramic heating body enable this product to achieve fast and uniform heating, providing you with an efficient working environment to meet your work needs.
• Intelligent Temperature Control: The product adopts a digital constant temperature device and sensor closed-loop PID control, making temperature control(122~752°F) more convenient and ensuring precise and stable temperature. In addition, the built-in thermometer can facilitate the detection of PCB temperature.
• Easy to Use: The LED display, one-touch switch, and adjusting knob allow you to control the temperature and operate it intuitively and accurately. Even novices can quickly learn how to use it.
• Thoughtful Design: It uses a stainless steel workbench, which can be preheated at low temperatures, saving energy, and it will not affect normal use because of rust.
• Safety First: The preheating table is made of anti-static materials, which are safer for sensitive components. The heat-dissipation holes ensure a good heat-dissipation effect, which not only facilitates the smooth and efficient operation of the product but also prolongs its service life.
• Easy to Carry & Store: Thanks to its lightweight weight and small size (9.84*8.66*3.54 inches), you can carry it with less effort and place it on the tabletop without taking up too much space.
• Easy to Clean: Thanks to its smooth surface, you can wipe the stain away with a dry rag(not included).